Skip to main content

Integration of the Autel MaxiCharger AC charging station into the Eponet portal

These instructions are step 3 for connecting an Autel AC charging station to the Eponet portal. 

Step 1 can be found at this link: Basic instructions for integrating charging stations

grafik.png

Software versions Autel MaxiCharger AC charging station
V1.15 (power control module) is the lowest version supported.
V1.16 (power control module) has been tested and is supported by
Eponet V1.19 (power control module) and V1.50 (charging controller) have been tested and are supported by Eponet (recommended version)

 

 

PIN – A PIN is included with the charging station. You will need this for connection and configuration.
Tip: Save this PIN in the Eponet portal for each charging station. Even better than a photo together with the QR code, because when configuring with the app, you can log in in a flash via this QR code. The PIN
is also essential for later support.

Connect the charging station via the Autel Config app

grafik.png

The Autel MaxiCharger AC charging station is configured via Bluetooth using the Autel Config app. To do this, you will need the PIN or the corresponding QR code with the integrated PIN. We recommend that you make these preparations (download and prepare the app) well in advance of installation. 

Access data for the Autel Config App must be requested in advance from emobility@gkshop.ch.

Important: The charging station must have software version V1.16 or higher. Please note the serial number of your Autel MaxiCharger charging station (e.g. AE0022A1GN5C0Gxxx). You will need this serial number later in the Eponet portal. 

Connect to the "Autel Config" app and select EPONET for the OCPP server. After selection, the charging station will restart and the OCPP server should be connected.

grafik.png

Checklist:

  • Software checked / latest version?

  • Internet configured / online?

  • OCPP server: Eponet link selected and charging station online on the Eponet portal?

Please ensure that the configuration is set correctly. Please note that Eponet is not responsible if the charging station is configured incorrectly and, for example, offline charging is permitted, resulting in incorrect billing on the Eponet portal.

Now continue with step 4.

Back to top